Wednesday, April 22, 2015

Mother's Day Card with Detachable Flower Brooch

Mother's Day is coming up, and you know what that means - breakfast in bed, massages, no dishes to clean, and an afternoon of sewing all to myself without someone whining for a snack! At least, that's what I want for Mother's Day. That and a cover stitch machine. A girl can dream, right?

This month's Michael's Makers post is all about celebrations, and I chose to celebrate Mothers. Mother's Day is a wonderful time to give special recognition to the women in our lives with love and appreciation for all that they do, and traditionally that involves giving Mother's Day cards, so I wanted to come up with a card that is more than it seems.


I'm actually not at all a card person at all. I never buy them. I appreciate the gesture, but I personally don't like to buy something that I know will get thrown away almost immediately. This card is different though - it has a detachable brooch that Mom can wear! I love that I am able to give a card that says all the wonderful things I want to say to my Mom, but has the bonus of something she can wear to show my love too.


SUPPLIES: cardstock in 2 colors (one for the card and one for the rose), vellum paper, jewelry pin, foam adhesive craft circles, paper trimmer, scissors, hot glue, craft glue.

Making The Rose:

ONE: first, use a bowl or something else circular to trace and cut out a circle from your pink card stock.
TWO: you can draw a swirl on your circle or just freehand it like I did. Start on the outer edge and cut a swirl until you reach the middle.
THREE: leave a little circle in the middle of your rose (we will use this to apply glue to hold your rose in place later.)
FOUR: here's what your rose should look like so far!


FIVE: starting at the outside edge, begin to tightly roll your rose.
SIX: keep rolling...
SEVEN: when you reach the center of your rose, it should look like this.
EIGHT: poke your pin through the center of your rose as shown.
NINE: cut a small circle from your card stock and apply it over the base of your pin. Secure with hot glue over the flat part of your pin.
TEN: allow your rose to uncoil slightly. Put a generous amount of hot glue at the center of your rose to secure in place.

Assembling the Card:

ONE: cut a piece of vellum to size. I made mine as long as my card, but left a couple of inches at the top and bottom.
TWO: secure the vellum to your card using crafting glue (don't go crazy with the glue or you will get lots of wrinkles! Trust me on that one ;) Allow your card to dry.


THREE: poke a hole through the top layer of your card using another pin (or something similar) where your rose will go. 
FOUR: insert your rose through your card and secure on the inside with the back of your pin.



FIVE: cut out your M's (I used my Silhouette Cameo for this, but you can buy or cut your letters by hand.) Place your foam adhesive dots on the back of your letter.
SIX: peel off the backing and attach your M's on either side of your rose.


SEVEN: finally, I tied a piece of ribbon in a bow and hot glued it to the front to complete the card.


Now fill your card with lots of love about Mom...


...and on top of your sweet words in your handmade card, Mom will have a detachable brooch that she can wear with pride on Mother's Day! That's my kind of card.


I hope you enjoy! The rose is so easy to make, you could even get the kids into it and make a card for Grandma. Happy Mother's Day!









6 comments:

  1. Ashley, would it be possible for you to include a downloadable copy of the letter M you used in your Mother's Day Card. I do not have the item that you mentioned where you found your M.

    ReplyDelete
    Replies
    1. Hi Kathie,

      I used my Silhouette CAMEO craft cutter to make the m, but you can find laser cut letters at any craft store, or print them out onto cardstock and cut by hand! -Jen

      Delete
  2. I'd love to know more about those jewelry pins. I couldn't find a picture that allowed me to really understand what they were. Even just a brand would help so I could do a search for them. They look different from what I use so I want to know more.

    ReplyDelete
    Replies
    1. Hi Sara! Here is a link to the ones I used. I hope this helps! http://www.michaels.com/bead-landing-pin-with-clutch-back/M10443119.html?dwvar_M10443119_color=Brass#q=jewelry+pins&start=25

      Delete
  3. What an awesome idea, I absolutely love this card! Id be happy to receive it that's for sure!

    Would love you to share this at our Marvelous Monday link party :-)

    ReplyDelete

Tell us what you think!