Photobucket

Wednesday, July 10, 2013

MAKE: Dino iPhone Tripod


So, if you know me, you know 2 things about me:
1 - I love my iPhone and anything Apple
2 - I love dinosaurs

Needless to say, this is the perfect combo of the 2, is it not?  I have a plethora of iPhone tripods around.  And I had these dino-butts laying around since this project, so I decided this would be the perfect opportunity to utilize them!

You will need:
The butt of a dinosaur (mine are from the dollar store)
Caulking
A suction cup
Paint brush

Use a utility knife to cut your dino in half.  Hopefully, yours are hollow like mine were (otherwise, no part of this project will work!)




Inject your dino butt with the caulking.  Use your finger to make sure the caulking is packed in tightly.


Stick your suction cup in the wet caulking.  Set your phone against it to make sure you're putting the suction cup in at the right angle.  Use a paint brush to remove any overflow caulking between the dino butt and the suction cup.


Next, dab a little caulking on the bottoms of the feet and tail.  If you don't do this, the dino will slide backwards every time your phone is resting on it.  The caulking gives it enough grip to sit still.


Unfortunately, since there is so much caulking inside the dino, this will take a few days to dry properly... about 4-5 days.  It's worth it, though, for how inexpensive, unique and fun this is!


I'm loving my dino-butt iPhone tripod! 







Check out our Link Party Page to see where we link up each week!
photobucket

23 comments:

  1. That is too cute! I think my husband would love this, yes, you hear me right, my husband. :)

    Bry from Fishtitch

    ReplyDelete
  2. Totally Clever! you gals amaze me.

    ReplyDelete
  3. This is too cute! I have trouble enough keeping the kids from stealing my phone, but at least this would help me find it after they drop it under the table.

    ReplyDelete
  4. I absolutely love this! The stuffing of the caulking into the dino-butt is a little disturbing...like a surgical enhancement gone wrong...but I get it and it's great! Thanks for sharing!

    ReplyDelete
  5. OMG this is soooo fun!! I must make this!

    ReplyDelete
  6. This is cool, but why limit yourself to calling it an iPhone holder, when it clearly works for all smartphones?

    ReplyDelete
  7. I love it! It's way more fun than any of the other phone holder-upper things I've seen.

    Stopping by from Tidy Mom.

    ReplyDelete
  8. Haha, i LOVE this!!! So different and unique! You ladies did a great job!

    My readers would love to see this! I’d love it if you linked this up over at Living Well Spending Less for Thrifty Thursday this week! http://www.livingwellspendingless.com/category/thrifty-thursday/

    ReplyDelete
  9. Very clever, inexpensive, down right cute and practical! Definitely on my TO DO list!

    ReplyDelete
  10. I love this dinotech meshup, I cant wait to try & share <3

    ReplyDelete
  11. Really loved the concept of tripod.Will certainly make few, at-least one for myself.for sure.

    diy christmas gift ideas

    ReplyDelete
  12. How cool is this!! Love it!! You could even use these as little hooks in the bathroom or stick a screw in the back instead of a suction pad and funk up a set of kids drawers (probably safer to use less pointy tails for young kids though)

    ReplyDelete
  13. Great idea! Butt, how about stuffing Dino's tush with some other medium, ie: SillyPutty, Playdough or some other whatever?

    ReplyDelete
  14. Hey has anyone actually done this? I am in a tough spot because I have committed to leading a craft program for this. I can't get it to work!! The caulk won't dry. Please help!

    ReplyDelete
    Replies
    1. Hi Charlotte, I was wondering if you ever did this project and how it turned out for you?

      Delete
  15. I have not tried this but maybe you could fill the Dino butt with some sort of filler before using caulk so the dry time is less? Small Styrofoam packing beads?

    ReplyDelete
  16. The most significant design change was that I made the charger plug hole in to a wedge shape to grip the charging lead. Phone holder for bed

    ReplyDelete
  17. Just curious if anyone has tried this yet? How long did it take the caulk to dry? I just did one today and am hoping it'll be ready for a Christmas present at the end of the week. It was also super messy for me for some reason.

    ReplyDelete
  18. I was wondering if any one has done this yet and if the caulk actually worked? I just did one today and am hoping that it'll dry in time for Christmas. It was a bit messier than I thought it would be. Do you think filling it with hot glue would work or would that just pull out once it's dried?

    ReplyDelete

Tell us what you think!

Related Posts Plugin for WordPress, Blogger...